Blower Mapro JDK-S-80 with Membrane 50 W. 230V.

Blower Description Mapro JDK-S-80 Membrane Blower 50W. 230V

Mapro JDK-S-80 Membrane Blower 50W 230V replaces the old EL-S model

The operating principle of the membrane blower is based onelectromagnetic oscillation.

Advantages of the blower Mapro
Electrical energy is not dissipated by mechanical friction, but used directly for the compression action of the membranes.
Since there is no friction between the moving parts, there is no need for lubrication, and therefore the conveyed air is not polluted at all.
In addition to this, the main advantages of using Mapro membrane blowers are:
- Areas of application
- aeration of wastewater in small purification plants;
- oxygenation of aquariums;
- aeration of baths in the chemical industry;
- bubble massage;
- tank pressurization in the bottling industry;
- generation of air bubbles in decorative water columns.
- Maximum simplicity of installation;
- long operating life (over 20,000 hours of continuous service);
- very low noise level;
- simple maintenance;
- compact and lightweight construction;
- low vibrations;
- negligible pulsation flow.

Technical specifications of the blower Mapro JDK-S-80 with Membrane 50W. 230V

Power: 50 W.
Voltage: 230V
Free Mouth Flow Rate: 145LT/MIN
Maximum Pressure: 380 mBAR

Data Sheet Blower Mapro JDK-S-80