Inverter DAB Active Driver Plus M/M. 1.1 230 V 8,5A

Inverter DAB Active Driver Plus M/M. 1.1 230 V 8,5A for single-phase motor V.230

Inverters

DAB Active Driver Plus are inverters for the control and command of hydraulic pumps and find their natural application in constant pressure pumping systems: domestic, industrial and agricultural
Thanks to the OLED display, the graphic interface is extremely simple and intuitive. Displaying or modifying any parameter is extremely simple, which simplifies maintenance.
The installation is very simple thanks to the assisted installation, the inverter asks the user the necessary parameters to be configured.
The Inverters

DAB Active Driver Plus allow a reduction of electricity consumption, thanks to the inverter technology and at the same time ensuring maximum comfort thanks to the constant pressure.
They are extremely versatile because they do not require external sensors and check valve, in fact they have a pressure sensor, a flow switch, and a check valve inside.

The advantages of theInverter DAB Active Driver Plusare:
- comfort thanks to constant pressure.
- energy saving thanks to the inverter technology.
- greater silence
- compactness
- all integrated protections: dry running, amperometric, abnormal voltages, overtemperature and frost.

Technical characteristics Inverter DAB Active Driver Plus M/M. 1.1 230 V 8,5A

Power supply:
Number of phases:1
Voltage (VAC): 1 x 220-240
Power supply frequency: 50 Hz - 60 Hz.
Absorbed current (Arms): 10

Electric pump output:
Number of Phases: 1
Voltage (VAC): 1 x 220-240
Frequency: 50/60 Hz.
Max phase current (Arms): 8.5

Hydraulic performance:
Degree of protection: IP55.
Max pressure: 13 bar.
Pressure regulation range: from 1 to 9 bar.
Max flow rate: 300 Lt. / min.

Working conditions:
Installation: any working position
Max. liquid temperature: 50°C.
Max. working temperature: 50°C.

Hydraulic connections:
Suction diameter (DNM): 1 1/4" male
Delivery diameter (DNM): 1 1/2" female

Features and protections Inverter DAB Active Driver Plus M/M. 1.1 230 V 8,5A:
Dry running protection: Yes
Amperometric protection towards electric pump: Yes
Protection from electronics overtemperature: Yes
Protection from abnormal supply voltage: Yes
Short circuit protection between output phases: Yes
Antifreeze protection: YES
Anticycling protection: Yes
Digital inputs: 1
Relay output: NO
Remote pressure sensor: YES
Communication interface for groups: YES one Active Driver Plus per pump
Does not require a check valve.
Equipped with graphic display.

Dimensions Inverter DAB Active Driver Plus M/M. 1.1 230 V 8,5A:
Length 237 mm
Height 282 mm.
Depth 184 mm.
Weight (excluding packaging) 3.5 Kg.

Applications Inverter DAB Active Driver Plus M/M. 1.1 230 V 8,5A:
Possible contexts of use may be: homes, condominiums, campsites, swimming pools, farms, water supply from wells, irrigation for greenhouses, gardens, agriculture, reuse of rainwater, industrial plants.

Inverter DAB Active Driver Plus M/M. 1.1 230 V 8,5A for electric pumps with single-phase V.230 motor designed for pressurizing hydraulic systems by measuring pressure and flow.
The inverter DAB Active Driver Plus is able to maintain a constant pressure in a hydraulic circuit by varying the number of revolutions per minute of the electric pump and through sensors it turns on and off independently depending on the hydraulic need.
Through the various possible settings and the availability of configurable input and output contacts, it is possible to adapt the operation of the inverter to the needs of various systems.

Technical Data Sheet Inverter DAB Active Driver Plus M/M. 1.1 230 V 8,5A

Manual Inverter DAB Active Driver Plus M/M. 1.1 230 V 8,5A