3 in 1 Boiler Saver Kit for condensing boiler

Description 3 in 1 Boiler Saver Kit

The 3 in 1 Boiler Saver Kit allows a continuous and complete protection of the:
- Sanitary circuit
- Heating circuit
- Condensate drainage circuit

Kit composed by:
Dosaplus 2
FDM-1P
Neutral Mini

Dosaplus 2 - Proportional antilimescale proportioner for boilers (In compliance with the directive DM 25/2012):
Equipment for domestic use for the treatment of drinking water, suitable for the protection of plants and distribution circuits from scale and corrosion, by dosing the water with a polyphosphate salt of special formulation. It also allows the renovation of old systems with the progressive reduction of scale and corrosion phenomena already in place.
It allows a better thermal efficiency of the plants and the reduction of energy and operating costs.
With "Flux Stop" by-pass valve for dosage regulation and an easy and practical maintenance, thanks also to the use of polyphosphate in ready charge.
Maximum working pressure: 8 bar
Maximum working temperature: 45°C
Minimum working temperature: 4°C.
Max total hardness 35°F.

FDM-1P - Magnetic Filter-Desiccant:
Optimal solution to solve plant problems due to pollution by particles (especially rust and sand) formed by corrosion and scaling during normal operation of a thermal plant
The magnetic filter ensures continuous protection of the boiler, as it retains all impurities present in the system and prevents circulation, thus avoiding wear and damage to other system components (e.g. circulators and heat exchangers). FDM removes magnetic and non-magnetic particles that can cause damage to the closed circuit especially during the first period of operation; afterwards, the continuous passage of fluid through the filter during normal operation gradually leads to the complete removal of all particles.
Compatible fluids _____ water, water + glycol
Max working pressure ______3 bar at 90°C
Working temperature ____________4÷90°C
Degree of filtration ______________600 µm
Plastic connections 3/4": Reinforced polyamide PA66.
Body: Polyamide PA66 reinforced.
Cap: Reinforced Polyamide PA66.
Filter cartridge: AISI 304 L stainless steel.
Ball valve: Brass CW 617 N.
Swivel fitting: Brass CW 617 N.
O-rings: EPDM.
Drain plug: Brass CW 614 N - 1/2".
Magnet: NdFeB - 4500 Gauss - brass magnet holder CW 617 N.
Magnet holder: Polypropylene.

Neutral mini - Acidity neutralizing filter for the treatment of condensate water from condensing boilers:
The waste water from condensing boilers, due to their acidity cannot be directly discharged into the sewer unless properly neutralized, Neutral mini allows to maintain the PH value between 5.5 and 9.5.
Maximum working pressure ______3 bar (43 psi)
Maximum Operating Temperature ____55°C (131°F)
Minimum operating temperature ______°C (39.2°F)
Head and socket: reinforced polypropylene.
O-ring: EPDM.
IN/OUT connections: 3/4" + NYLON hose connector.
Dimensions: diameter 70 mm - height 193 mm.