Digital thermostat ON/OFF L03BM1A 1 output with probe

Digital thermostat ON/OFF L03BM1A 1 output with probe

ON/OFF thermostat - P.I.D. 1 output with temperature alarm management, suitable for heating or refrigeration systems with 1 output with 1 probe.

Technical characteristics Thermostat:
Sensor: 1 NTC 10K* LS130 probe (included)
Power supply: 230V~
Output: N° 1
Measuring range: -40 ÷ 105 °C
Resolution: 0,1(-19.9÷99.9), 1 °C
Probe accuracy Degree of protection: IP40 (back panel)

Electrical characteristics Digital thermostat:
Output on single-pole relay in deviation.
Contacts capacity 16(4)A 240 Va.c. for each output.
Consumption 3W.

Standards and approvals:
Complies with EN60730-1; EN60730-2-9; EN55022 (Class B); EN50082-1.

Installation Digital ON/OFF thermostat:
DIN rail mounting.

Operation Digital ON/OFF thermostat L03BM1A::
Control type: can operate in ON/OFF or PID mode.
ON/OFF control: in ON/OFF mode the output is ON or OFF depending on input temperature, setpoint (1SP) and hysteresis value (1HY).
The hysteresis indicates the magnitude of the setpoint temperature offset to turn the output back on.
PID control: in PID mode the output is ON for a fraction of a 1CT cycle time.
The cycle time characterizes the dynamics of the system to be controlled and affects the accuracy of the control.
Proportional control.
Integrative proportional control.

Features Thermostat L03BM1A:
NTC10k inputs.
Configurable parameters:
- refrigeration or heating function by assigning respectively positive or negative sign to the differential or proportional band;
- minimum or maximum setpoint limits;
- oN or OFF status of the output in case of defective probe;
- minimum ON/OFF time of the output independent of the temperature value
Operating temperature -10 ÷ 50°C.
Frontal protection degree IP40 if correctly installed on back panel.
ON/OFF key on front panel.

Technical data sheet Digital thermostat ON/OFF L03BM1A

Manual Digital thermostat ON/OFF L03BM1A