Electric pump Calpeda GXRM11 HP.0,5 230V

Description Electric pump Calpeda GXRM11:

The electricpump Calpeda GXRM11 in stainless steel, is classified as a single-impeller submersible pump. The presence of the vertical delivery port facing upwards allows the installation of the same in small wells without the need for a curve on the pump. It can be used both for emptying flooded rooms or tanks and for drawing water from ponds, streams, rainwater collection pits and for irrigation.

The presence of the suction grid with double row of holes against clogging allows the passage of solids up to 10 mm.

Technical specifications Calpeda

GXRM11
Electric pump Calpeda GXRM11
Maximum Absorbed Power: 0,7 kW
Rated motor power: 0,5 HP
Maximum Height: 11 mt
Type of power supply: Single-phase

Electric pumpdimensions Calpeda GXRM11:
Height (h) Electric pump: 300 mm
Width (f) Electric pump: 176 mm
Net weight (kg) Electric pump: 6,5 kg

Design:
Single-impeller submersiblepump Calpeda GXRM11 in chrome-nickel stainless steel, with vertical delivery port

Applications
Clean water with solids in suspension up to a diameter of 10 mm
Emptying of flooded rooms or tanks
Draining water from ponds, streams, rainwater collection pits and rainwater harvesting and irrigation

Limits of use
Liquid temperature up to 50 °C
Maximum immersion depth: 5 m
Minimum level of emptying with float 70 mm
Minimum manual drainage level 15 mm for GXR
Continuous duty

Motor
2-pole induction motor, 50 Hz (n = 2900 1/min)
GXRM11: single-phase 230 V ± 10% with float switch and thermal protector
Built-in capacitor
Insulation class F
Protection IP X8 (for continuous immersion)
Dry winding with double humidity resistant impregnation
Execution according to: EN 60 335-2-41.


Data Sheet Electric Pump Calpeda GXRM11